Sending call data to Active911 using SNPP
From Active911 Documentation Wiki
You may send pages to your Active911 account using SNPP if you wish. The settings are as follows:
- Server
- snpp.active911.com
- Port
- 444
- Password
- (none)
- Pager ID
- the part of your Alert Email before the @ sign
You may also need the following:
- SNPP version
- 2
- Timeout
- 20 seconds
If you are getting error responses, please make sure that you are using the full pager ID (it should look something like 1234-aAbBcCdDeE) and that your timeout is set to a fairly high value. This is because we actually perform paging in real time; if your SNPP implementation times out after a few seconds, it will never receive a 250 "OK" code from our servers.
For more information on SNPP, take a look at http://www.snpp.info/