PC Webview

From Active911 Documentation Wiki
Revision as of 14:03, 12 November 2019 by Wyattg (Talk | contribs)

Jump to: navigation, search


Pc webview.jpg

Webview is a way for you to get alarms and mapping in realtime on a PC. For example:

  • On a terminal at the dispatch center
  • On a large LCD or plasma display at a station
  • In a truck

Webview is also a great way to dispatch alarms. Even when you don't have an actual address - sporting events or off-road locations, for example - you can click on the map and send help right to your mouse click.

Get started!

  1. Go to the Devices tab in your Active911 account, and create a new device. Set the "Page type" to "Webview"
  2. After saving, write down the Device Code from the right hand column
  3. Go to the PC that will be running Webview.
  4. Check with your IT staff to make sure that the computer won't be powered off each day. Make sure that your firewall is not blocking port 80, 443, or 5280.
  5. Ask your IT staff to check your browser. Supported browsers include:
    • Google Chrome
    • Firefox 18 or newer
    • Microsoft Internet Explorer 9 or newer
  6. Open a supported browser, and go to http://webview.active911.com
  7. Enter the code you wrote down and click the button
  8. Webview loads after a 10 second delay. Once loaded, go back to the first computer (the one with your Active911 account loaded) and click the test button (Test button.png) next to the device you created. This will send a test message to the PC running Webivew.

How it works

Once Webview is running, your computer establishes a data connection to our servers. This allows us to send messages in real time. Computers running Webview can:

  • Receive real time pages
  • Act as part of a Page group
  • Respond to an alarm (click on it)
  • View Map Data and associated resources


Settings for Webview

The gear in the top right corner is where you can access your Webview settings. There you can change the following settings:

Map Marker Density
You can change the density of the map markers, so you can see more or less of map data points at a time. The default selection is Normal.
  • None - Selecting this option will prevent all map data points from displaying on the map, at all zoom levels.
  • Dense Urban - Use this setting if your agency has a lot of map data points in a small area. This option will only display map data points when the screen is zoomed in close to ground level, preventing map data from cluttering the screen.
  • Urban - Allows map data to show only when the zoom level is set high enough to only see a few blocks from the center of the screen
  • Normal - When set to Normal, map data is visible when the zoom level is set to view about a square mile of area.
  • Rural - If the device is in a rural setting, with map data miles apart, select the rural setting.
Show Alarms For
You can set how long you want to see alerts on the page. The options range from 15 minutes to 1 day.
Auto Scroll Triggers
These settings control, if the screen scrolls to a new alert and if it opens the call.
New Alert
When this is checked, it will scroll to the new alert. If it is unchecked, it will stay on your current call, or screen.
Open Alert
When this is checked and you clicked on a call, it will take you to the call and open the call. When unchecked, it will not take you to the call.
The map screen will only move when a user manually interacts with the device to move the map screen.
Alarm Sidebar
This is the side bar on the left that displays the alarms when they come in. You can select for it to show at all time or to be Hidden at all times.
Status Sidebar
This is the side bar on the right that displays the status and assignments for all members on the account. You can select for it to show at all time or to be hidden at all times.
Audio Options
Silent Alarms
The alert will show up on the screen, but no sound will be made.
Toned Alarms
The alert will show up on the screen, and a sound will be made. If you have more than one agency connected to your account, you can select a different tone for each account by selecting the drop down next to each accounts name.

Sending Alarms

If you create your webview settings with the proper permissions, you will be able to generate alarms directly from webview by simply clicking on the map. This is especially useful for directing responders to precise locations with no address - for example, wilderness areas or points within football stadiums or fairground sites.


Webview is only for use on PC systems, not on mobile phones. Additionally, any computer running Webview must have a connection to the internet and be configured for always-on operation. This is very important! Once you have Webview running, we request that you do *not* close or refresh the browser unless absolutely necessary. Do not run Webview on computers that are turned off each day. Webview is built for always-on operation.

GPS integration

If your Webview PC is not showing up on response maps, you may need to troubleshoot the GPS. Go to the GPS troubleshooting page and follow the instructions. We need an accuracy of better than 100 meters in order to use your GPS position. If you are not getting good GPS accuracy, you may need to install GPSGate or a plugin supplied by your GPS manufacturer.


Dispatch from Webview

In order to dispatch from Webview, it must be created with "send alert" capabilities.

  1. Have your administrator log into Active911
  2. Click on the Devices tab, then open up your Webview device
  3. Click "Send Alerts" next to the word Capabilities. If you don't see this option, either you are not editing a webview device or else you don't have Send # Alert permissions
  4. After saving, refresh Webview
  5. You can now dispatch alerts simply by clicking on the map!

Further notes

  • Alarms automatically remove themselves after 4 hours
  • Not supported under Internet Explorer in Windows XP (requires IE9)
  • If your screen says connecting and never connects, your firewall may be blocking port 5280. Have your IT staff unblock port 5280.